Distribution boards and electrical equipment

End stop /limiter/ without screw grip, 10 mm wide, Wago, WAGO, 249-117
Screwless end stop for DIN rail, width 10 mm WAGO 249-117

€0,88

I-0-II changeover switch, DIN-mounted, CX3, 32 A, 1P, 230 V, 1 module, Legrand, LEGRAND LOW VOLTAGE, 412902
Changeover switch I-0-II DIN mounting CX3 32A 1P 230V 1 modules Legrand, LEGRAND LOW VOLTAGE, 412902
€26,65 €32,50
TX3 1P 6A curve C 6kA Legrand circuit breaker, LEGRAND LOW VOLTAGE, 403430
TX3 circuit breaker 1P 6A, curve С, 6kA Legrand, LEGRAND LOW VOLTAGE, 403430
€6,61 €8,06
Flush-mount distribution board, 2 x 12 modules, Practibox S with transparent door and N and PE terminals, Legrand, LEGRAND LOW VOLTAGE, 135152
FLUSH-mounted distribution board 2х12 modules Practibox S with transparent door and N and PE terminals Legrand, LEGRAND LOW VOLTAGE, 135152
€27,72 €33,80
Single-module impulse relay 16A 1F LEGRAND
SINGLE-MODULE IMPULSE RELAY 16A 1F LEGRAND
€18,40 €22,44
DX3 combined circuit breaker 1P+N 16A curve C 30mA type A 10kA 2 modules Legrand, LEGRAND LOW VOLTAGE, 411061
RCBO DX3 1P+N 16A curve C 30mA type A 10kA 2 modules Legrand, LEGRAND LOW VOLTAGE, 411061
€66,09 €80,60
Distribution board for industrial sockets and DIN modules, IP66, UV, PG entry, BLOCK series (6 DIN and 1x16A and 1x32A and 2xSchuko) Scame-632.3520-000
Industrial socket distribution board with DIN modules IP66, UV, PG inlet, series BLOCK (6 DIN and 1х16A and 1х32A and 2хSchuko) Scame-632.3520-000
€28,46 €34,71
RX3 1P 25A curve C 6kA circuit breaker - 419204
Circuit breaker RX3 1P 25A, C curve, 6kA - 419204
€3,84 €4,68
Panel for industrial sockets and DIN modules, IP66, UV-resistant, PG cable entry, BLOCK series (6 DIN and 3x16A or 32A) Scame
Enclosure for industrial sockets and DIN modules IP66, UV, PG inlet, series BLOCK (6 DIN and 3х16A or 32A) Scame
€26,84 €32,73
DIN-rail socket M1175 Schuko 16A 2.5 mod. ABB, 2CSM210000R0721
ABB
Socket for DIN rail M1175, Schuko 16A, 2.5 modules ABB, 2CSM210000R0721
€6,64 €8,10
Insulated terminal BLUE 8x16mm2 76A Legrand, LEGRAND LOW VOLTAGE, 4842
BLUE insulated terminal 8х16mm2 76A Legrand, LEGRAND LOW VOLTAGE, 4842
€4,26 €5,20
RCCB 4P 63A 100mA series F204 type AC ABB, 2CSF204001R2630
ABB
RCD 4P 63A 100 mA F204 series type AC ABB, 2CSF204001R2630
€102,80 €125,36
Tunnel terminal block L/N/E 5P 82A with 10 openings OTL16-5x 5x1xAl/Cu 1,5-16mm² 1000V MOREK, MAA5016A11
Tunnel terminal L/N/E 5P 82A with 10 holes OTL16-5x 5x1xAl/Cu 1,5-16mm² 1000V MOREK, MAA5016A11

€19,62

Insulated terminal block GRAY A14-S 1P 1x25mm² + 12X2.5mm² + 2X4mm² IP20 80A 500V Pollmann, POLLMANN, PE2020253
GREY insulated terminal A14-S 1P 1x25mm² + 12X2.5mm² + 2X4mm² IP20 80A 500V Pollmann, POLLMANN, PE2020253

€5,04

Insulated terminal GREEN PE12H 12x16mm² IP20 63A 690V MOREK, MAD1012G15
GREEN insulated terminal block PE12H 12x16mm² IP20 63A 690V MOREK, MAD1012G15

€3,60

Flat DIN rail TS35 mounting bracket H20 screw M6 MOREK, MMD6420A23
Mounting bracket for DIN rail TS35 flat H20 screw M6 MOREK, MMD6420A23

€0,96

Switch I-0-II DIN mount SFT440 40A 4P 400V 4 modules Hager, HAGER
Changeover switch I-0-II DIN mounting SFT440 40A 4P 400V 4 mod. Hager, HAGER

€67,07

2-pin jumper bar for 2.5 mm² terminal block for the TOPJOB® S series, WAGO, 2002-402
Insulated two-position jumper, light gray WAGO 2002-402

€0,33

U-type busbar, 2P, 10 mm², 63 A, for 6 circuit breakers, L1L2 Legrand, LEGRAND LOW VOLTAGE, 404958
U-type busbar 2P 10mm2 63A circuit breaker count: 6 L1L2 Legrand, LEGRAND LOW VOLTAGE, 404958
€10,66 €13,00
Panel assembled with industrial sockets, wall-mounted, ADAPTO series, 1x 3P+N+E 16A and 2x Schuko Scame, SCAME, 625.1000-004
Assembled distribution board with industrial sockets, wall mounting, ADAPTO series 1х 3P+N+E 16A and 2х Schuko Scame, SCAME, 625.1000-004
€26,59 €32,43
Surface-mount distribution board 1x8M Plexo IP65 FB Legrand, LEGRAND LOW VOLTAGE, 1908
Surface-mounted distribution board 1х8М Plexo IP65 FB Legrand, LEGRAND LOW VOLTAGE, 1908
€31,98 €39,00
Moblock 4P 125A-11 distribution terminal block 2x35 + 2x25 + 7x6mm² MOREK, MAB4125A18
Moblock distribution terminal block 4P 125A-11 2x35 + 2x25 + 7x6mm² MOREK, MAB4125A18

€19,41

Panel 632.4500 type B assembled with Scame industrial sockets and circuit breakers ABB, SCAME, 632.4500-B
Distribution board 632.4500, type B, assembled with industrial sockets Scame and overcurrent protection devices ABB, SCAME, 632.4500-B
€166,00 €202,44
GREEN 1P 200A distribution terminal block OJL200A input Al/Cu 1x70 output 6x16mm² MOREK, MAB1201G10
GREEN distribution terminal block 1P 200A OJL200A input Al/Cu 1x70 output 6x16mm² MOREK, MAB1201G10

€25,00

SCHNEIDER ELECTRIC - Acti 9 iCT modular contactor 25A 2NC 230…240Vac 1 mod. A020060017 white
SCHNEIDER ELECTRIC - Modular contactor Acti 9 iCT 25A 2NC 230…240Vac 1 module A020060017 white
€20,65 €25,18
HLAK 1P GRAY distribution terminal block for 2x35/4x25mm2 cable, DIN rail mounting, 160A, 1000V, Pollmann, POLLMANN, PE2080178
Distribution terminal block HLAK 1P GREY, for cable 2x35/4x25mm² DIN mounting 160A 1000V Pollmann, POLLMANN, PE2080178

€6,48

Surface-mounted apartment distribution board Makel ТАП-4 A030310004
Residential distribution board for outdoor mounting Макел ТАП-4 A030310004

€3,19

Surface-mounted apartment distribution board Makel TAP-6 A030310006
Residential distribution board for outdoor mounting Макел ТАП-6 A030310006

€4,79

Insulated terminal BLUE N12H 12x16mm² IP20 63A 690V MOREK, MAD1012N15
BLUE insulated terminal block N12H 12x16mm² IP20 63A 690V MOREK, MAD1012N15

€3,60

Easy 9 power busbar 3P 10mm2 63A 4 circuit breakers L1L2L3 SE, SCHNEIDER ELECTRIC LOW VOLTAGE, EZ9XPH312
Supply busbar Easy 9 3P 10mm2 63A 4 circuit breakers L1L2L3 SE, SCHNEIDER ELECTRIC LOW VOLTAGE, EZ9XPH312
€7,20 €8,78

Popular

VGTECH

More from VGTECH

Latrans

More from Latrans

COMMEL

More from COMMEL

ORNO

More from ORNO

BTICINO

More from BTICINO

LEGRAND

More from LEGRAND

Recently viewed

Distribution boards and electrical equipment brings together enclosures, protective devices, controls and assembly components. Start with each part's task to compare the products required in the appropriate area.

Choose the enclosure and its contents separately

In electrical distribution boards , distinguish distribution enclosures from industrial and socket configurations. Check mounting, space and included contents. The box itself does not mean a complete wired distribution board. For mounting elements, terminals, busbar combs and supplementary enclosure parts, continue to distribution board assembly. Keep the enclosure, mechanical base and conductor connections as different items.

Distinguish protection areas

In circuit breakers and fuses , first choose between an automatic device, fuse link and load-break or disconnecting version. Then compare the exact series and parameters required. For other protection tasks, use residual current devices and surge protection. The general label “protection” does not make different equipment types equivalent substitutes.

In every area, separate the main device from spare parts and accessories. An interchangeable module, holder or additional contact should not be assumed to be a complete set. Keep the product's full designation and check its exact configuration, especially when some existing equipment remains in use.

Control, timed tasks and operator elements

Continue to motor control and protection for contactor, motor protection, thermal overload and variable frequency areas. For individual relay functions, explore relays and timers. Compare function, power supply version, outputs and mounting space by the specific reference. Control section data should not be confused with the parameters of the remaining equipment.

For the control panel, use push buttons, indicators and switches. Separate the assembled device from its head, contact and mounting elements. An empty control station and a complete offer are different purchases. Colour or similar shape alone does not determine package contents or compatibility between parts from different series. Note separately supplied markings and mounting parts.

For the final list, record every component's purpose, exact code, required accessories and included parts. For enclosures, check their own use conditions; for devices, compatibility with the specific equipment. This organises the actual solution by function without deriving general electrical characteristics or compatibility from membership of one category.