Lighting

Professional LED Construction Floodlight 2x50W 2x4500lm 4000K with tripod stand, IP65, 220V, with 1.5-meter H05RN-F 3x1mm2 cable Latrans
Professional construction LED floodlight 2х50W 2х4500lm 4000K with tripod stand IP65 220V with H05RN-F 3x1mm2 cable, 1,5 metres, Latrans
€35,90 €65,27
Moisture-resistant LED light VGTECH – IP65 | 2x LED tubes included
Moisture-resistant LED light VGTECH – IP65 | 2x LED tubes included
€14,84 €26,99
Professional Construction LED Floodlight  2x50W 2x4500lm 4000K with tripod stand, IP65, 220V, with 3.0-meter H05RN-F 3x1mm2 cable Latrans with a convenient storage and carrying bag
Professional construction LED floodlight 2х50W 2х4500lm 4000K with tripod stand, IP65 220V, H05RN-F 3x1mm2 cable, 3,0 metres, Latrans, with convenient storage and carrying bag
€49,50 €90,00
Professional LED Construction Floodlight 2x50W with Stand | 10,000 lm | IP65 | Telescopic Tripod 1.77 m | Neutral Light 4500K
Professional LED Construction Floodlight 2x50W with Stand | 10 000 lm | IP65 | 2-meter power cable | Telescopic Tripod 1.77 m | Neutral Light 4500K
€35,90 €65,27
RIGEL LED Work Light with Tripod – 55W, 4950 lm, 6500K
RIGEL LED work light with tripod – 55W, 4950 lm, 6500K
€36,54 €42,00
LED selfie ring with 160 cm tripod, suitable for product photography, professional makeup, video chats, YouTubers, TikTok, and more, Latrans, XD210
LED selfie ring light with 160 cm tripod, suitable for product photography, professional make-up, video chat and YouTubers, TikTok and more, Latrans, XD210
€13,63 €24,79
Portable CAVO 30W LED floodlight, on a stand, 2100 lm, IP44, 4000K, with 1.5 m cable - FLP-4, VIRONE
Portable LED floodlight CAVO 30W, on a stand, 2100 lm, IP44, 4000K, with 1,5 m cable - FLP-4, VIRONE
€13,75 €15,80
PLANA LED UNDER-CABINET LIGHT ADVITI AD-OM-6476L4/G/SW 4W 240lm + CORDLESS SWITCH - AD-OM-6477L4/G
Under-cabinet lamp PLANA LED ADVITI AD-OM-6476L4/G/SW 4W 240lm + БЕЗКОНСОРТЕН switch - AD-OM-6477L4/G
€22,24 €25,56
GEMINIX LED 2x10W, portable rechargeable battery-powered work floodlight, 1200lm, IP44, 4000K, 5000mAh, ADVITI, AD-NR-6466L4
GEMINIX LED 2x10W, portable rechargeable work floodlight, 1200lm, IP44, 4000K, 5000mAh, ADVITI, AD-NR-6466L4

€23,01

RIGEL LED work lamp, 5-wing folding workshop lamp, E27 55W, 6500K, 4950lm - WL-10, VIRONE
RIGEL LED work light, 5-wing folding workshop lamp, E27 55W, 6500К, 4950lm - WL-10, VIRONE
€15,97 €18,36
100W 4000K 10000lm LED Floodlight 120° x 120° 20000h IP65 Black GLARO EMOS, ZS2254B
Floodlight LED 100W 4000K 10000lm 120° x 120° 20000h IP65 black GLARO EMOS, ZS2254B
€13,35 €16,28
Latrand
РVС post for ГОТ 1 m, АТРА, 1110

€8,40

LED Damp Proof light fixture 36W 4000K 4680lm 120° 30000h IP65 1.2m DUSTY EMOS
Luminaire LED Damp Proof 36W 4000K 4680lm 120° 30000h IP65 1.2m DUSTY EMOS
€15,21 €18,55
LED Headlamp 5W 350 lm, 4-hour operating time, with USB rechargeable 3.7 V 800 mAh Li-ion battery and PIR switch Commel - C401-212
LED head torch, 5W 350lm, 4 hours of operation, with USB battery Li-ion 3,7V 800mAh and PIR switch, Commel - C401-212
€11,09 €13,52
Orno Austrul E27 outdoor wall lamp for basement, IP54, metal grille, 60W, white - AD-OP-6561WE27SPS
Orno Austrul E27 outdoor basement wall lamp, IP54, metal grille, 60W, white - AD-OP-6561WE27SPS
€5,99 €6,89
Damper Ø100 mm B10 Plus, E-100 - BLIND100
Flap Ø100 mm B10 Plus, E-100 - BLIND100

€1,87

ENERGY-SAVING BULB DS.MTW 12W/865 E14, O050450016
ENERGY-SAVING LAMP DS.MTW 12W/865 Е14, O050450016

€1,84

Work light, 330 lm, 45 m, 3 h, rechargeable, 1200 mAh, plastic, IP43 EMOS, P4537
Work light 330lm 45m 3ч rechargeable 1200mAh plastic IP43 EMOS, P4537
€13,73 €16,74
LED headlamp 11W, 3 brightness levels, 500 lm, 3 hours of runtime, with USB charging, 3.7V 1500mAh Li-ion battery, magnetic holder, Commel - C401-211
LED head torch, 11W, 3 light levels, 500lm, 3 hours of operation, with USB battery Li-ion 3,7V 1500mAh, magnetic holder, Commel - C401-211
€21,05 €25,67
Work light 30W 3000lm 4000-6500K IP44 with telescopic stand and built-in 9000mAh battery Commel, COMMEL, C308-314
Work light 30W 3000lm 4000-6500K IP44 with telescopic stand and built-in 9000mAh battery, Commel, COMMEL, C308-314
€63,20 €77,07
LED Damp Proof light fixture 18W 4000K 2340lm 120° 30000h IP65 0.6m DUSTY EMOS
Luminaire LED Damp Proof 18W 4000K 2340lm 120° 30000h IP65 0.6m DUSTY EMOS
€9,64 €11,76
LED floodlight 20W 4000K 2000lm 120° x 120° 25000h IP65 black SIMPO EMOS
Floodlight LED 20W 4000K 2000lm 120° x 120° 25000h IP65 black SIMPO EMOS
€5,39 €6,57
CABLE PVV-MB1 3X2.50 220/380V 50M ROLL - LTR01010047
CABLE ПВВ-МБ1 3Х2.50 220/380V 50М ROLL - LTR01010047

€82,50

4W LED Headlamp, 6 brightness levels, 280 lm, 4-hour operating time, with USB-rechargeable 3.7V 1200mAh Li-ion battery and PIR switch, Commel, COMMEL, C401-213
Headlamp LED 4W 6 brightness levels 280lm 4 hours of operation with USB battery Li-ion 3,7V 1200mAh and PIR switch Commel, COMMEL, C401-213
€7,07 €8,62
PIRYT LED 10W garden light with 140° motion sensor, 800 lm, IP54, 4000 K, gray, AD-OP-6109GLPMR4, ADVITI
Garden luminaire PIRYT LED 10W, with 140° motion sensor, 800lm, IP54, 4000K, grey, AD-OP-6109GLPMR4, ADVITI
€13,12 €15,08
Emergency LED light 2.5W 100lm 3h 4000K IP20 surface-mounted with remote control VG, COMMEL, C85251
Emergency luminaire LED 2.5W 100lm 3h 4000K IP20 surface mounting with remote control VG, COMMEL, C85251
€16,83 €20,53
10W 580lm LED work light with 360° magnetic mount and 2000 mAh battery, USB charger, IP44, Commel - C401-015
Work light LED 10W 580lm with 360° magnetic stand and battery 2000 mAh USB charger IP44 Commel - C401-015
€14,73 €17,96
LED Damp-Proof Light Fixture 51W 4000K 8150lm 120° 50000h IP66 1.5m MISTY EMOS
LED luminaire Damp Proof 51W 4000K 8150lm 120° 50000h IP66 1.5m MISTY EMOS
€45,88 €55,95
LED Damp Proof light fixture 50W 4000K 6500lm 120° 30000h IP65 1.5m DUSTY EMOS
Luminaire LED Damp Proof 50W 4000K 6500lm 120° 30000h IP65 1.5m DUSTY EMOS
€18,14 €22,12
Work light 2x30W 2x3200lm 6500K with tripod stand IP44 220V with H05RN-F 3x1mm2 cable, 2.5 meters, Commel - C308-533
Work light 2х30W 2х3200lm 6500K with tripod stand IP44 220V, with H05RN-F 3x1mm2 cable, 2,5 metres Commel - C308-533
€70,86 €86,41

Popular

VGTECH

Shop all VGTECH

Latrans

Shop all Latrans

COMMEL

Shop all COMMEL

ORNO

Shop all ORNO

BTICINO

Shop all BTICINO

LEGRAND

Shop all LEGRAND

Recently viewed

You notice lighting most when something gets in the way of everyday life: the worktop is left in shadow, the bedside lamp dazzles you, and working in the garage means constantly moving the light. That is why the choice starts with the space and the activity. At Latrand, you can explore light sources for existing fittings, lights for indoor and outdoor spaces, portable lamps and specialist solutions. Organise your needs by area rather than looking for the same lamp for every situation.

Think about the room at different times of day

In the living room, you may want general lighting, a separate reading area with its own light, and a more subdued atmosphere in the evening. In the kitchen, the starting point is often the work surface, while in the hallway, moving through the space and reaching the switch matter. Note where you stand or sit during your usual activities. This makes it easier to judge whether a fitting should light a broad area, direct light towards a particular spot or remain an unobtrusive part of the interior.

For ceiling and wall lights, consider how the shape works with the available wall or ceiling space and the furniture nearby. When choosing downlights and LED panels, also account for the installation dimensions and the space required by the particular model. A photograph of the room helps with proportions, but does not replace measurements. When replacing an existing fitting, it is also worth noting any marks that will be exposed when its base is removed.

Look at the intended position from where someone would normally be: on the sofa, at the desk or at the table. Consider whether an exposed light source will be in your line of sight and whether the housing will obstruct a door or cupboard. In a work area, take the screen into account too. The position of the light in relation to it deserves attention when choosing a fitting, particularly if being able to move or direct the light is among the features you need.

If you are keeping the fitting, start there

Replacing a light source is a different purchase from choosing a complete fitting. Before comparing LED bulbs, note the base type and markings on the old bulb, along with the fitting's restrictions. Size and shape matter too: having the right connection alone does not mean the bulb will fit beneath the shade or behind the cover. For a fitting with an integrated light source, consult its documentation to establish the replacement options.

Wattage describes electrical power consumption, while luminous flux indicates the amount of light emitted. Do not judge the expected brightness by watts alone. Colour temperature describes the warm or cool appearance of the light; it does not tell you how brightly a room will be lit. If you are adding a lamp alongside fittings already in use, compare these characteristics together. Differences in light colour can provide a deliberate accent, but they should be a conscious choice.

For linear lamps and tubes, keep the exact markings from the existing light source and fitting. A similar appearance is not a sufficient basis for choosing a replacement. The same approach is useful for specialist lamps: first establish the application and the equipment's requirements, then look for the appropriate option.

If you want to dim the light, make that part of your choice from the outset. Check whether the bulb or complete fitting supports this function and which controls it is designed to work with. If you are keeping an existing dimmer, its exact model is useful information. Keep this requirement separate from a preference for a warmer light colour: one concerns control, while the other describes the light itself and cannot substitute for it.

Plan the position and finish of accent lighting

Lighting around a recess, display cabinet or piece of furniture should be chosen with the surface you want to highlight in mind. For LED strips, modules and accessories, establish the visible length, how they will be positioned and where the necessary additional components will go. Check the chosen product's power and control requirements. Consider the design in daylight too: visible profiles, cables and end pieces contribute to the overall appearance even when the lighting is off.

Track lighting warrants a separate list of components. Mark out the track layout and the areas towards which the fittings will be directed, and confirm the compatibility of the track, lights and accessories for the particular system. For a light to help you find your way around a bed or a child's room in the evening, explore night lights according to the desired position, controls and power supply. Assess the decorative effect alongside ease of everyday use.

Outdoors, the location matters more than the general category

An entrance beneath a canopy, an open path and a facade present different conditions. For garden and facade lighting, describe where the fitting will be installed and what it will be exposed to. Then compare the location with the model's specified use and level of protection. The colour and material of the housing are part of the choice, but an attractive photograph does not tell you whether the product is intended for your installation position.

When choosing floodlights, consider the area you want to see and the direction of the light in relation to people, windows and neighbouring spaces. Include a sensor or other control in the brief only if you want that function. Check whether it is built in or requires an additional compatible component. A light that stays on and lighting that switches on automatically can serve different purposes even on the same facade.

Work lighting follows the person and the task

For repairs, installation or maintenance, consider work lights and construction floodlights in terms of how they will be positioned. Does the product need to stand on the floor, be carried between rooms or be directed into a confined space? Compare its support, portability and stated power supply. For a rechargeable model, check what is included and how it charges, especially if the light will travel with the rest of your equipment.

When working on a component, it helps to consider where the light will come from once you are standing in front of it with your tool. The machine, furniture or repair work itself may restrict the space available for a lamp. Look at the adjustment and mounting options described for the product, and whether the accessories you want are included. This lets you compare how it will actually be used in the workspace.

Torches and headlamps are another starting point when the light needs to follow your gaze or be carried in your hand. For permanent lighting in a workspace, consider the appropriate industrial fittings according to the environment and the project. Emergency and other specialist lights have their own intended uses and should not be selected simply because they resemble an ordinary lamp. Finally, group your chosen models by room: this keeps dimensions, controls and the parts required tied to the specific task.