Distribution boards and electrical equipment

AF12-30-10 contactor 3P 5.5kW (12A AC-3) 1NO 48...130V 50/60Hz ABB, 1SBL157001R1210
ABB
Contactor AF12-30-10 3P 5.5kW (12A AC-3) 1NO 48...130V 50/60Hz ABB, 1SBL157001R1210
€26,65 €32,50
DX3 4P 25A curve C 6kA Legrand circuit breaker, LEGRAND LOW VOLTAGE, 407930
Circuit breaker DX3 4P 25A curve С 6kA Legrand, LEGRAND LOW VOLTAGE, 407930
€34,11 €41,60
1P 500A GRAY distribution terminal block with cover, busbar 1x8x24mm, 4x10mm2, 5x16mm2, 2x35mm2, DIN rail mounting (H=50mm, W=49mm; L=96mm), ARNOCANALI, BKB50012
Distribution terminal block 1P 500A GREY with cover busbar 1x8x24mm, 4x10mm2, 5x16mm2, 2x35mm2 DIN mounting (H=50mm, W=49mm; D=96mm), ARNOCANALI, BKB50012

€32,07

Automatic circuit breaker SH201 1P 25A curve C 6kA ABB, 2CDS211001R0254
ABB
Circuit breaker SH201 1P 25A curve С 6kA ABB, 2CDS211001R0254
€3,79 €4,62
MS116 motor protection 1.5 kW TM 2.5-4 A 50 kA ABB, 1SAM250000R1008
ABB
MS116-4.0 three-pole motor protection circuit breaker 2.5–4.0 A ABB 1SAM250000R1008
€42,12 €51,36
Metal enclosure 250x250x150mm with plate IP66 IK10 ARGENTA IDE, GN252515
IDE
Metal enclosure 250х250х150 mm with plate IP66 IK10 ARGENTA IDE, GN252515

€71,32

Load break switch /isolator/ Acti 9 iSW 3P 63A 415V 3 modules SE, SCHNEIDER ELECTRIC LOW VOLTAGE, A9S65363
Acti9 iSW 3P 63 A 415 V switch disconnector Schneider Electric A9S65363
€26,24 €32,00
Metal enclosure 250x200x150mm with mounting plate IP66 IK10 ARGENTA IDE, GN252015
IDE
Metal enclosure 250х200х150 mm with plate IP66 IK10 ARGENTA IDE, GN252015

€65,78

Thermal overload relay TF42 0.74-1A 1NO-1NC ATEX ABB, 1SAZ721201R1023
ABB
Thermal overload relay TF42-1.0, 0.74 ... 1.0 A, class 10 – ABB 1SAZ721201R1023
€31,25 €38,11
Explosion-proof single-pole switch 16A 2xM20 Ex 2GD Zone 1/2/21/22 IP66 2NO Scame, SCAME, 592.R001-02
Explosion-proof single-pole switch 16A 2xM20 Ex 2GD Zone 1/2/21/22 IP66 2NO Scame, SCAME, 592.R001-02
€155,47 €189,60
SH201 1P 50A curve C 6kA ABB circuit breaker, 2CDS211001R0504
ABB
Circuit breaker SH201 1P 50A curve С 6kA ABB, 2CDS211001R0504
€6,84 €8,34
Insulated terminal 3P+N for 13M panel 76A Legrand, LEGRAND LOW VOLTAGE, 404814
Insulated terminal 3P+N for distribution board 13М 76A Legrand, LEGRAND LOW VOLTAGE, 404814
€8,53 €10,40
Load break switch /isolator/ Acti 9 iSW 3P 125A 415V 3 modules SE, SCHNEIDER ELECTRIC LOW VOLTAGE, A9S65392
Acti9 iSW switch disconnector, 3P, 125 A, 415 V Schneider Electric A9S65392
€62,87 €76,67
Thermal overload protection TeSys D 9...13A 1NO-1NC SE, SCHNEIDER ELECTRIC LOW VOLTAGE, LRD16
TeSys LRD thermal overload relay for motor protection, 9…13 A, 1 NO + 1 NC Schneider Electric LRD16
€45,66 €55,68
Surface-mount distribution board, 2x12 modules, Practibox S with white solid door and N and PE terminals Legrand-135202
Surface-mounted distribution board 2х12 modules Practibox S with solid white door and N and PE terminals Legrand-135202
€27,72 €33,80
Assembled illuminated red pushbutton 1NO-1NC 250Vac Ø22mm XB4 SE, SCHNEIDER ELECTRIC LOW VOLTAGE, XB4BW3465
Harmony XB4 illuminated pushbutton, red, 1 NO + 1 NC, up to 250 V Schneider Electric XB4BW3465
€26,32 €32,10
Surface-mounted metal enclosure XL3 S 160, 144 modules (6x24), Legrand model, LEGRAND LOW VOLTAGE, 337206B
Surface-mounted metal distribution board XL3 S 160 144 modules (6х24) modules Legrand, LEGRAND LOW VOLTAGE, 337206B
€423,89 €516,94
TX3 3P 32A Curve C 6kA Legrand Circuit Breaker, LEGRAND LOW VOLTAGE, 403548
TX3 circuit breaker 3P 32A, curve С, 6kA Legrand, LEGRAND LOW VOLTAGE, 403548
€17,48 €21,32
TX3 3P 10A curve C 6kA Legrand circuit breaker, LEGRAND LOW VOLTAGE, 403543
TX3 circuit breaker 3P 10A, curve С, 6kA Legrand, LEGRAND LOW VOLTAGE, 403543
€14,82 €18,07
Manual switch I-0-II DIN rail mounting E214 25A 2P 230V 1 mod. ABB, 2CCA703031R0001
ABB
Two-pole switch I-0-II E214-25-202 25 A ABB 2CCA703031R0001
€27,78 €33,88
Contactor AF65-30-11 3P 30kW (65A AC-3) 1NO+1NC 24...60V 50/60Hz ABB, 1SBL387001R1111
ABB
Contactor AF65-30-11 3P 30kW (65A AC-3) 1NO+1NC 24...60V 50/60Hz ABB, 1SBL387001R1111
€216,48 €264,00
Explosion-proof box EX 122x120x90mm IP66, with 4x M20 cable glands, 4xWDU 6.0mm², Zenith-P EX series Scame, SCAME, 644.0345-J03
Explosion-proof box EX 122х120х90mm IP66, with 4х cable glands М20, 4xWDU 6,0mm², series Zenith-P ЕX Scame, SCAME, 644.0345-J03
€107,31 €130,86
DX3 combined RCBO 1P 16A curve C 10mA type A 10kA 1 module Legrand, LEGRAND LOW VOLTAGE, 418974
Combined RCD DX3 1P 16A curve C 10mA type A 10kA 1 modules Legrand, LEGRAND LOW VOLTAGE, 418974
€49,04 €59,80
Recessed mounting panel ComfortLine 1x12/13 (13), UK600 modular series, with solid metal door, IP30, and N and PE terminals ABB, 2CPX077840R9999
ABB
ComfortLine flush-mounted enclosure 1х12/13 (13) mod., series UK600 with opaque metal door IP30 and N and РЕ terminals ABB, 2CPX077840R9999
€45,41 €55,38
Time relay, pulse generator, CT-TGD, 7x 0.05s...100h, 1c/o 6A, 24...240Vac ABB, 1SVR500160R0000
ABB
Time relay, pulse generator, CT-TGD, 7x 0.05s...100h, 1c/o 6A, 24...240Vac ABB, 1SVR500160R0000
€71,01 €86,60
Metal enclosure 1000x600x300mm WITHOUT mounting plate IP66 Spacial CRN SE, SCHNEIDER ELECTRIC LOW VOLTAGE, NSYCRN106300
PanelSeT CRN steel enclosure, 1000 × 600 × 300 mm, without mounting plate Schneider Electric NSYCRN106300
€232,16 €283,12
DX3 combination RCD/MCB 1P+N 32A curve C 30mA type AC 6kA 2 modules Legrand, LEGRAND LOW VOLTAGE, 411016
RCBO DX3 1P+N 32A curve C 30mA type AC 6kA modules: 2 Legrand, LEGRAND LOW VOLTAGE, 411016
€52,23 €63,70
Insulated terminal BLUE 5x25mm2 + 17x4mm2 63A ABB, 2CPX062755R9999
ABB
BLUE insulated terminal 5х25mm2 + 17х4mm2 63A ABB, 2CPX062755R9999
€18,55 €22,62
Metal enclosure 300x250x200mm with mounting plate IP66 IK10 ARGENTA IDE, GN302520
IDE
Metal enclosure 300х250х200 mm with plate IP66 IK10 ARGENTA IDE, GN302520

€80,00

Easy 9 3P 10A Curve C 6kA SE circuit breaker, SCHNEIDER ELECTRIC LOW VOLTAGE, EZ9F35310
Easy9 miniature circuit breaker, 3P, 10 A, curve C, 6 kA Schneider Electric EZ9F35310
€11,77 €14,35

Recently viewed

Distribution boards and electrical equipment brings together enclosures, protective devices, controls and assembly components. Start with each part's task to compare the products required in the appropriate area.

Choose the enclosure and its contents separately

In electrical distribution boards , distinguish distribution enclosures from industrial and socket configurations. Check mounting, space and included contents. The box itself does not mean a complete wired distribution board. For mounting elements, terminals, busbar combs and supplementary enclosure parts, continue to distribution board assembly. Keep the enclosure, mechanical base and conductor connections as different items.

Distinguish protection areas

In circuit breakers and fuses , first choose between an automatic device, fuse link and load-break or disconnecting version. Then compare the exact series and parameters required. For other protection tasks, use residual current devices and surge protection. The general label “protection” does not make different equipment types equivalent substitutes.

In every area, separate the main device from spare parts and accessories. An interchangeable module, holder or additional contact should not be assumed to be a complete set. Keep the product's full designation and check its exact configuration, especially when some existing equipment remains in use.

Control, timed tasks and operator elements

Continue to motor control and protection for contactor, motor protection, thermal overload and variable frequency areas. For individual relay functions, explore relays and timers. Compare function, power supply version, outputs and mounting space by the specific reference. Control section data should not be confused with the parameters of the remaining equipment.

For the control panel, use push buttons, indicators and switches. Separate the assembled device from its head, contact and mounting elements. An empty control station and a complete offer are different purchases. Colour or similar shape alone does not determine package contents or compatibility between parts from different series. Note separately supplied markings and mounting parts.

For the final list, record every component's purpose, exact code, required accessories and included parts. For enclosures, check their own use conditions; for devices, compatibility with the specific equipment. This organises the actual solution by function without deriving general electrical characteristics or compatibility from membership of one category.