Distribution boards and electrical equipment

TeSys D auxiliary contact block 1NO-1NC, on-delay 0.3...3 s SE, SCHNEIDER ELECTRIC LOW VOLTAGE, LADR0
Auxiliary contact block TeSys D 1NO-1NC switch-on delay 0.3...3 s SE, SCHNEIDER ELECTRIC LOW VOLTAGE, LADR0
€61,37 €74,84
Power supply 1P In:100...240Vac Out:24Vdc 2.2A, 3DIN, Legrand, LEGRAND LOW VOLTAGE, 146723
Modular switched-mode power supply 100–240 V AC / 24 V DC, 60 W, 2,5 A Legrand 146723
€66,09 €80,60
Terminal cover OTS63T1 for 63...80A 1P disconnector ABB, 1SCA022353R6910
ABB
Terminal cover OTS63T1 for disconnector 63...80A 1P ABB, 1SCA022353R6910
€2,80 €3,41
Auxiliary contact with 1NO+1NC /CA4-11ERT/ for front mounting on AF09...38 contactors ABB, 1SBN010155R1011
ABB
Auxiliary contact block CA4-11ERT, 1NO+1NC, front mounting ABB 1SBN010155R1011
€7,32 €8,93
Time relay, star-delta, 1x 0.1s…1s, 2c/o 16A, 12...240Vac/dc, 1DIN, Elko EP, ELKO EP, CRM-2T/UNI
Star-delta timer relay, 1x 0.1s…1s, 2c/o 16A, 12...240Vac/dc, 1DIN, Elko EP, ELKO EP, CRM-2T/UNI

€50,05

Distribution terminal block KR 250, 250A, 400V AC, 1x120mm²/16x25mm², 92x100x45 Atra /5101, АТРА
Distribution terminal block КР 250, 250A, 400V AC, 1х120mm²/16х25mm², 92х100х45 Atra /5101, АТРА
€13,46 €15,84
H150 solid front panel W800 QCC081501 SpEe ABB, 1SZE980010B0250
ABB
Front panel H150 solid W800 QCC081501 SpEe ABB, 1SZE980010B0250
€23,04 €28,10
gG 50A 14x51mm cylindrical fuse, Legrand, LEGRAND LOW VOLTAGE, 14350
Cylindrical fuse type gG 50A 14x51mm Legrand, LEGRAND LOW VOLTAGE, 14350
€2,45 €2,99
32A 3P DIN load-break switch with visible circuit isolation, front handle Legrand, LEGRAND LOW VOLTAGE, 22500
Switch-disconnector 32A 3P DIN with visible circuit isolation, front handle Legrand, LEGRAND LOW VOLTAGE, 22500
€82,08 €100,10
Panel heater 15W 110...250Vac/dc IDE, RC15SV
IDE
Enclosure heater 15W 110...250Vac/dc IDE, RC15SV

€25,51

Undervoltage release UVR-C T4-T5-T6 24...30Vac/dc ABB, 1SDA054887R1
ABB
Undervoltage release UVR-C T4-T5-T6 24...30Vac/dc ABB, 1SDA054887R1
€74,78 €91,20
CR-M interface relay 12 VDC, 12A, 2 changeover contacts, LED, socket mounting ABB, 1SVR405611R4100
ABB
CR-M012DC2L interface relay with LED, 12 V DC, 2 changeover contacts ABB 1SVR405611R4100
€7,05 €8,60
AF52-30-11 contactor 3P 22kW (50A AC-3) 1NO+1NC 100...250V 50/60Hz ABB, 1SBL367001R1311
ABB
AF52-30-11-13 contactor, 22 kW at AC-3/400 V, auxiliary contacts 1NO+1NC, 100–250 V AC/DC coil ABB 1SBL367001R1311
€106,12 €129,41
Acti 9 MX+OF shunt trip voltage release 100…415Vac SE, SCHNEIDER ELECTRIC LOW VOLTAGE, A9N26946
Acti9 MX + OF undervoltage release with signal contact – Schneider Electric A9N26946
€40,90 €49,88
ComfortLine flush-mounted distribution board, 6x24 modules, CU26V (144), with solid metal door, IP30, and N and PE terminals ABB, 2CPX052615R9999
ABB
Flush-mounted distribution board ComfortLine 6х24 mod. CU26V (144) with solid metal door IP30 and Н and РЕ terminals ABB, 2CPX052615R9999
€443,09 €540,35
3P voltage monitoring relay, min+max threshold, 1c/o 8A, 2VA, 172…287Vac, 1DIN, Elko EP, ELKO EP, HRN-57N
Voltage monitoring relay 3P, min+max threshold, 1c/o 8A, 2VA, 172…287Vac, 1DIN, Elko EP, ELKO EP, HRN-57N

€59,40

Additional residual current device module 4P 63A 30mA type F DX3 Legrand, LEGRAND LOW VOLTAGE, 410534
Add-on residual current module 4P 63A 30mA type F DX3 Legrand, LEGRAND LOW VOLTAGE, 410534
€99,14 €120,90
Metal enclosure 1800×600×250 Q843B618 SpEe L IP43 ABB, 1SZE430800B0150
ABB
Metal enclosure 1800×600×250 Q843B618 SpEe L IP43 ABB, 1SZE430800B0150
€378,35 €461,40
Protective cover OXEC21 IP54 for ATS remote display ABB, 1SCA147308R1001
ABB
Protective cover OXEC21 IP54 for remote АВР display ABB, 1SCA147308R1001
€50,51 €61,60
Insulation monitoring relay Vigilohm 1 kOhm...10 MOhm SE, SCHNEIDER ELECTRIC LOW VOLTAGE, IMDIM15H
Insulation monitoring relay Vigilohm 1 kOhm...10 MOhm SE, SCHNEIDER ELECTRIC LOW VOLTAGE, IMDIM15H
€786,07 €958,62
Cam switch 0-1 3P 25A IP65 red handle in enclosure SE, SCHNEIDER ELECTRIC LOW VOLTAGE, VCF1GE
Cam changeover switch 0-1 3P 25A IP65 red handle in box SE, SCHNEIDER ELECTRIC LOW VOLTAGE, VCF1GE
€66,24 €80,78
Explosion-proof start/stop 1xM25 Ex 2GD Zone 1/2/21/22 IP66 2NO+2NC Scame, SCAME, 593.321-5SS
Explosion-proof start/stop 1xM25 Ex 2GD Zone 1/2/21/22 IP66 2NO+2NC Scame, SCAME, 593.321-5SS
€265,84 €324,19
TeSys E contactor 3P 30kW (65A AC-3) 1NO-1NC 220V 50Hz SE, SCHNEIDER ELECTRIC LOW VOLTAGE, LC1E65M5
Contactor TeSys E 3P 30kW (65A AC-3) 1NO-1NC 220V 50Hz SE, SCHNEIDER ELECTRIC LOW VOLTAGE, LC1E65M5
€113,41 €138,30
Single-phase meter for DIRECT measurement of electrical energy D11 15, Modbus, 2 tariffs, for 1-module DIN mounting, 40 A, MID ABB, 2CMA241665R1000
ABB
Single-phase electricity meter for DIRECT electrical energy measurement, D11 15, Modbus, 2 tariffs, DIN mounting, 1 module, 40A, MID ABB, 2CMA241665R1000
€116,69 €142,30
Easy 9 MSU 1P+N surge protection 275Vac 1 module SE, SCHNEIDER ELECTRIC LOW VOLTAGE, EZ9A32223
Overvoltage protection Easy 9 MSU 1P+N 275Vac 1 module SE, SCHNEIDER ELECTRIC LOW VOLTAGE, EZ9A32223
€37,84 €46,15
Direct handle RHD F/P for XT2...XT4 ABB, ABB, 1SDA069053R1
ABB
Direct rotary handle for XT2 and XT4, fixed and plug-in mounting, gray ABB 1SDA069053R1
€38,37 €46,79
Moblock 4P 100A-7 distribution terminal block 2x25 + 5x6mm² MOREK, MAB4100A18
Distribution terminal block Moblock 4P 100A-7 2x25 + 5x6mm² MOREK, MAB4100A18

€14,40

H300 front panel for 12x MCB W400 QCS143001 SpEe ABB, 1SZE980020B0200
ABB
Centered COMBI modular panel 300 × 400 mm ABB 1SZE980020B0200
€25,01 €30,50
DPX3 1600 TM 4P 1000A 50kA adjustable (In x 0.8...1) Legrand, LEGRAND LOW VOLTAGE, 422270
Circuit breaker DPX3 1600 TM 4P 1000 A 50 kA, adjustable (In x 0.8...1) Legrand, LEGRAND LOW VOLTAGE, 422270
€2.037,72 €2.485,02
BLUE 1P 135A tunnel terminal with 4 openings OTL35-2 2xAl/Cu 2.5-35mm² 1000V MOREK, MAA2035B10
Tunnel terminal BLUE 1P 135A with openings: 4 OTL35-2 2xAl/Cu 2,5-35mm² 1000V MOREK, MAA2035B10

€9,06

Recently viewed

Distribution boards and electrical equipment brings together enclosures, protective devices, controls and assembly components. Start with each part's task to compare the products required in the appropriate area.

Choose the enclosure and its contents separately

In electrical distribution boards , distinguish distribution enclosures from industrial and socket configurations. Check mounting, space and included contents. The box itself does not mean a complete wired distribution board. For mounting elements, terminals, busbar combs and supplementary enclosure parts, continue to distribution board assembly. Keep the enclosure, mechanical base and conductor connections as different items.

Distinguish protection areas

In circuit breakers and fuses , first choose between an automatic device, fuse link and load-break or disconnecting version. Then compare the exact series and parameters required. For other protection tasks, use residual current devices and surge protection. The general label “protection” does not make different equipment types equivalent substitutes.

In every area, separate the main device from spare parts and accessories. An interchangeable module, holder or additional contact should not be assumed to be a complete set. Keep the product's full designation and check its exact configuration, especially when some existing equipment remains in use.

Control, timed tasks and operator elements

Continue to motor control and protection for contactor, motor protection, thermal overload and variable frequency areas. For individual relay functions, explore relays and timers. Compare function, power supply version, outputs and mounting space by the specific reference. Control section data should not be confused with the parameters of the remaining equipment.

For the control panel, use push buttons, indicators and switches. Separate the assembled device from its head, contact and mounting elements. An empty control station and a complete offer are different purchases. Colour or similar shape alone does not determine package contents or compatibility between parts from different series. Note separately supplied markings and mounting parts.

For the final list, record every component's purpose, exact code, required accessories and included parts. For enclosures, check their own use conditions; for devices, compatibility with the specific equipment. This organises the actual solution by function without deriving general electrical characteristics or compatibility from membership of one category.